Completely made from scratch with the latest LG kdz filtering. With the protections "imposed" by Koreans canceled, and doing as much as we want to the rom. Les has lasted little grace ..... jajajajaja...
With Fm Radio (Defcomg & illie321) running with mod Team (Vector17) and of course translated into several languages Castilian and implemented by the Team.
For those of you wearing the V4 XXL or larger bin Xbsall partition, only flasear and enjoy.
DARKROOM V4 XXL ONLY IF HAVE PARTITIONS BIG EUROPEAN ICS BY XBSALL
This new custom rom, and this whole zipaling deoxeada and thanks to able to skip the Lg protection and to do rom to our liking.
Come up with the important, ROM.
Quote:
|
Source from Xbsall: http://forum.xda-developers.com/show....php?t=1963847 Bin Large Partition from Xbsall: 28brtlarge.rar - 323.46 MB OPTION #2: V28b Prerooted with larger System/Data Partitions  This ROM is going to upgrade you to ICS, NO MATTER if you are on GINGERBREAD, on PORTED ICS or JELLYBEAN. FLASH THIS ONLY IF YOU DON'T HAVE V28B PREINSTALLED AND ROOTED IN YOUR P920. DONT FORGET TO KEEP A BACKUP OF YOUR INTERNAL SD AND YOUR DATA AT YOUR PC CAUSE ALL WILL BE ERASED. If you want more space in SYSTEM and DATA PARTITIONS you can use this 28brtlarge.rar This process is for advanced users. Download and extract it.. Take a CWM BACKUP (NOT with 2nd init CWM or TWRP Recovery) Take a BACKUP of your InternalSD DATA at your PC Flash the BIN file with LG FLASHTOOL Reboot After it gets flashed PRESS VOLUME DOWN and POWER until the factory reset screen appears. Factory Reset After ANDROID starts go into your SETTINGS > STORAGE and ERASE INTERNAL MEMORY and restore your Internal SD Data from your PC REBOOT to CWM RECOVERY Format SYSTEM RESTORE YOUR BACKUP That's it |
Quote:
|
Source in Spanish: http://www.thedarkroomteam.com/index.php?topic=760.0 To install the rom DARKROOM V4 XXL we must change the recovery: Bootloader 1.10+TWRP Recovery: VOL + / 3D Button and Power When you leave the red LG logo, release Power and keep holding down the other two until it TWRP recovery. Bootloader 1.10+TWRP or Bootloader 1.25+TWRP Recovery: VOL - / 3D Button and Power When you leave the gray LG logo, release Power and keep holding down the other two until it TWRP recovery. Bootloader 1.25+TWRP Unzip the file to the desktop, open the folder and run the Unlock.bat With the phone with the battery removed, put the USB and get a warning when 5 seconds .... put the battery and hopefully cmd screen is solid green. We already have the recovery position. If bat file don't ends check you have installed Let Device Manager. Connect the phone without battery, only the usb and windows began to emit sound on and off, now we have to go to Windows Device Manager, and see how it comes and goes the OMAP4430 or Cosmo. We must be vigilant and click with right button above, select update driver and select the previous rar, folder (usb_drv_windows) updated once disconnected the phone and go to the folder the bootloader. |
VERY FAST
VERY STABLE
VERY SMOOTH
LOW BATTERY
MADE BY DARKROOM
CHANGELOG
-Base Ics EURO V30A
-System partitions to 1'54gb (Thanks to Xbsall)
-Totally Deoxeada and Zipaling
-Protection LG annulled
-kernel Darkroom
-Optimized startup
-Improvements in battery consumption
-Better use of RAM
-New governors Cpu
-Improved Reading Sd
-Improved sensitivity of screen
-Improved data rate, 3G, Wifi
-Battery percentage 1%
-Coverage new icon
-Sounds JB 4.2.2
-Sound notification exclusive Darkroom
-Original Keyboard LG
-Original Keyboard Sony Xperia Z
-Radio FM(Defcomg & illie321) Traducida&Mod by Darkroom Team
-Play Store 4.0
-New Shutdownanimation and Bootanimation Darkroom
-ES Explorer
-Voltage Control
-Tesla Led
-QrDroid
-Quick Boot
-Dolphin Browser
-Flash Player
-LgHome Launcher 3.0
-Atom Launcher
-Pie Control
-TTPod
-DropBox
-Wallpapers Darkroom
-The official Team Darkroom Apk
DARKROOM V4 XXL IS ONLY IF WE HAVE to flash and partitions BIG IN EUROPEAN ICS XBSALL
Put the Rom in Phone Memory.
Entered the Recovery.
We WIPE ------ WIPE CACHE ------ FACTORY RESET ------ SYSTEM
Again all three times to make sure there is none of the above.
Install the. Zip
Reboot the phone, and hope has to start.
Once we start to install everything, and we start to configure it to our liking. It is recommended to restart the phone 2 or 3 times to settle everything.
To optimize a little more change these two values:
Settings> Developer Options
Window animation scale "change the value of 1x" to 0.5 x
Animation scale "change the value of 1x" to 0.5
Ramdisk characteristics:
-Added support for init.d
-Adjusted Taskiller
-Removed on interactive startup
-SWAP to ZRAM changed much faster.
-Desactivated insecure boot.
Kernel Characteristics:
-Updated version of the Linux kernel 3.0.21
-Added support for ZRAM.
-Lowering the speed of the GPU for stability.
-Replaced hotplug by hotplugx. (Thanks to imoseyon).
-Improved compression of the kernel.
-Added LiveOC v2. (Thanks to Ezekeel)
-Added ZEN and ROW schedulers. (ROW Snatch default scheduler)
-Underclock GPU for greater stability and less consumption. (157,6MHz-307,2MHz-384MHz)
-New set of frequencies. (200MHz-400MHz-600MHz-800MHz-1008MHz-1200MHz-1300MHz-1400MHz)
-UNDERVOLT at some frequencies.
-Changed to "Voltage Control v1". (You will be able to touch the voltage of any of the frequencies, so I can have s as often you want to increase the voltage or down if your phone supports it or for less consumption)
-Improved stability at high frequencies.
-Manual GPU OC [Thanks a imoseyon]
And other things that I have left out
F.A.Q
- What is it for you to explain what next?
+ To improve your phone's performance, especially in benchmarks.
- I can annoy my phone? (May explode, burn, abduct an alien, and etc)
-NO, if you follow my steps, obviously.
I'm not sure of it, that I can do?
+ Talk to your mother, you have a serious problem.
- What happens if I change it and I start the phone?
+ You will have to flash the kernel.
Come to the heart.
-Added support for init.d
-Adjusted Taskiller
-Removed on interactive startup
-SWAP to ZRAM changed much faster.
-Desactivated insecure boot.
Kernel Characteristics:
-Updated version of the Linux kernel 3.0.21
-Added support for ZRAM.
-Lowering the speed of the GPU for stability.
-Replaced hotplug by hotplugx. (Thanks to imoseyon).
-Improved compression of the kernel.
-Added LiveOC v2. (Thanks to Ezekeel)
-Added ZEN and ROW schedulers. (ROW Snatch default scheduler)
-Underclock GPU for greater stability and less consumption. (157,6MHz-307,2MHz-384MHz)
-New set of frequencies. (200MHz-400MHz-600MHz-800MHz-1008MHz-1200MHz-1300MHz-1400MHz)
-UNDERVOLT at some frequencies.
-Changed to "Voltage Control v1". (You will be able to touch the voltage of any of the frequencies, so I can have s as often you want to increase the voltage or down if your phone supports it or for less consumption)
-Improved stability at high frequencies.
-Manual GPU OC [Thanks a imoseyon]
And other things that I have left out
F.A.Q
- What is it for you to explain what next?
+ To improve your phone's performance, especially in benchmarks.
- I can annoy my phone? (May explode, burn, abduct an alien, and etc)
-NO, if you follow my steps, obviously.
I'm not sure of it, that I can do?
+ Talk to your mother, you have a serious problem.
- What happens if I change it and I start the phone?
+ You will have to flash the kernel.
Come to the heart.
Quote:
|
Now I will explain one thing to get the most out of your kernel. On the route system / etc / init.d 99Dark_Tweaks find a file called. I explain what it all means what it says. echo "200000"> / sys/devices/system/cpu/cpu0/cpufreq/screen_off_max_freq echo "200000"> / sys/devices/system/cpu/cpu1/cpufreq/screen_off_max_freq These lines correspond to the frequency when the screen is turned off (both should be equal) Example: echo "100000"> / sys/devices/system/cpu/cpu0/cpufreq/screen_off_max_freq echo "100000"> / sys/devices/system/cpu/cpu1/cpufreq/screen_off_max_freq ---------------------------------------------------------------------------------------------------------------------------------------- echo "0" /sys/devices/system/cpu/cpu0/cpufreq/gpu_clock This line is that you can modify to choose how often you want to run the gpu on your Optimus 3D, you can set it for the 0 to 2 inclusive, so that if you modify the value quoted by a number other than 0 will have another frequency. Meaning of values: 0=384 1=404MHz 2=424MHz Not everyone supports all frequencies. So for example, if my GPU want to be 442MHz , has to change: echo "1" /sys/devices/system/cpu/cpu0/cpufreq/gpu_clock Save and reboot every time you start your phone what you have changed. |
DARKROOM V4 XXL DONWLOAD LINK
KERNEL DARKBOOT V4 XXL DarkBoot_V4_XXL.zip - 11.97 MB ;)
SOURCE:www.thedarkroomteam.com
OUR EARLIER WORK
If you like our work, you can invite a coffe
